Slow Fall Confetti Bundles/Stacks

Slower Loading

Sold by the bundle/stack

When you have time to load your Celebration Launcher, our Slow Fall Bundles of confetti can save you money! We say “Slower loading”, only because it may take a minute or so to load compared to our Quick Load packs that may take 30 seconds. Our Bundles of slow fall confetti are the same large concert size, flameproof, non-toxic pieces used in our QL packs. In fact, QL packs are made from these bundles. Each bundle is approx. 3/4″ wide x 2 3/4″long x 2 1/2″ tall and 2oz +/- in weight, they are ready for loading into our cannons or for use in our ShotMax.

Stacks of confetti can even be hand tossed into the air for weddings, magic shows, ribbon cuttings, photo shoots, parties, New Year’s, stage shows,  etc.

Each of these bundles will make about 4 smaller stacks which are used in our Celebration Launchers. If used in our ShotMax, just drop stack after stack into the machine for a continuous display of confetti!

Easy to load

1 bundle = 3 or 4 stacks

7 stacks of your favorite color (s) are need to fill the 20″ launcher

10 stacks are needed to fill the 32″ launcher

Mix or match colors

All of our Confetti Paper and Streamer Paper is made in America.

 Flame retardant, non-toxic, environmentally friendly, complies with PS-46-71 and NFPA 701, conforms to CONEG, ASTM D4236, LHAMA, FHSA, is biodegradable, bleed resistant, meets all state and federal laws, and made in the U.S.A. from virgin wood pulp.

Follow these simple steps

Just pinch off about 1/4 of the bundle to create a small stack (keep it tight and even) and push the small end into the tube.

Pinch off another stack, turn it 90 degrees from the previous stack (already in the tube) and push it in.

Repeat this until the tube is filled to the bottom of the launcher (by the elbow). If some hangs out the open end, that is fine.

The rubber band is not used in the tube and should be discarded.

Menu
error: Content is protected. You may not take this. Please put it back!